結合無線通信、MCU、動畫和USB以減少尺寸、實現輕松裝配和低成本系統。 達拉斯（2007年10月29日）消息，德州儀器有限公司（NYSE: TXN）于今天宣布推出工業上第一個擁有完整USB控制器的sub-1 GHz無線頻率的片上系統，在PC和RF之間搭建了一個快速且簡易的橋。CC1111將TI一級的RF收發器（CC1101）的卓越性能結合到加強的8051微控制器中，系統可編程閃存和一個全速USB控制器用于提高低功率無線傳感器網絡。（參見 www.ti.com/cc1111-pr.） TI的高性能模擬業務部高級副總裁Art George說：“CC1111的突破性整合，結合我們的SimpliciTITM網絡協議，允許用戶開發一級的無線傳感器網絡，適應小型PCB、低成本系統和快速發展的市場。通過傳送創新的低功率RF技術、創新的支持和創新軟件，TI給客戶帶來了完整的RF解決方案實現在sub-1 GHz和2.4 GHz頻率范圍間的下一代產品性能。” CC1111瞄準了各種低功率無線應用市場，包括安全系統、自動儀表閱讀、工業監視控制、住宅和樓宇自動化及遙控市場。CC1111能兼容CC1110（sub-1 GHz SoC）, CC2511 （配有USB的2.4 GHz SoC） 和CC2510 （2.4 GHz SoC）. 額外的特點包括嵌入式128比特的AES安全處理器，卓越的接收器選擇性和板塊化性能，高靈敏性，可編程數據級可達500 kBaud，寬泛的供壓范圍（2.0 V 到3.6 V）和四個用于減少功率損耗的靈活功率模塊。 SimpliciTI網絡協議是一個私人擁有的低功率RF協議，目標切重于簡單、小型的RF網絡（少于256個節點）。此協議要求最小的MCU資源，設計用于在CC1110/11和CC2510/11 SoCs 或是結合CC1100和CC2500接收器的MSP430超低功率的MCU實現簡易執行。 售貨和包裝 CC1111可從TI和其授權的分銷商處獲得，包裝大小為6-mm x 6-mm QFN-36。建議批量購買，批量購買1000件單價價格為4.65美元。全面的開發包（CC1110-CC1111DK），開始你的開發之路。 [font=times]original text [/font] [font=times]TI delivers industry’s first sub-1ghz RF system-on-chip with integrated USB controller for wireless sensor networks[/font] [font=times][color=#708090]Combination of Radio, MCU, Flash and USB Reduces Size, Eases Assembly and Lowers System Cost DALLAS （October 29, 2007） - Texas Instruments Incorporated （TI） （NYSE: TXN） today introduced the industry‘s first sub-1 GHz radio-frequency （RF） system-on-chip （SoC） with an integrated USB controller, enabling a fast and easy bridge between PCs and RF. The CC1111 combines the excellent performance of TI‘s state-of-the-art RF transceiver （CC1101） with an enhanced 8051 microcontroller （MCU）, 8/16/32 kB of in-system programmable flash memory and a full-speed USB controller for improved low-power wireless sensor networking. （See www.ti.com/cc1111-pr.） "The breakthrough integration of the CC1111, combined with our SimpliciTITM network protocol, allows customers to develop state-of-the-art wireless sensor networks with smaller PCB size, lower overall system cost and faster time-to-market," said Art George, senior vice president of TI‘s high-performance analog business. "By delivering innovative low-power RF technology, support and software, TI gives customers complete RF solutions to achieve next-generation performance in both sub-1 GHz and 2.4 GHz frequency ranges." The CC1111 targets a wide variety of low-power wireless applications including alarm and security systems, automatic meter reading, industrial monitoring and control, home and building automation and remote controls. The CC1111 is pin- and register-compatible with the CC1110 （sub-1 GHz SoC）, CC2511 （2.4 GHz SoC with USB） and CC2510 （2.4 GHz SoC）. Additional features include embedded 128-bit AES security coprocessor, excellent receiver selectivity and blocking performance, high sensitivity, programmable data rate of up to 500 kBaud, wide supply voltage range （2.0 V to 3.6 V） and four flexible power modes for reduced power consumption. SimpliciTI network protocol is a proprietary low-power RF protocol targeting simple, small RF networks （less than 256 nodes）. This protocol requires minimal MCU resources and was designed for easy implementation on the CC1110/11 and CC2510/11 SoCs or MSP430 ultra-low-power MCUs combined with CC1100 and CC2500 transceivers. SimpliciTI network protocol is provided as source code under a free license, without royalties, and can be downloaded at www.ti.com/simpliciti. Availability and Packaging The CC1111 is available now from TI and its authorized distributors in a 6-mm x 6-mm QFN-36 package. Suggested resale pricing for the CC1111 starts at $4.65 in 1,000-piece quantities. Start your development today with a comprehensive development kit （CC1110-CC1111DK）.[/color][/font]